installImages (2)
出社後 4GB 500yen な microSD を端末に挿してコマンド実行。
fdisk -l な出力が微妙だったにも関わらず kickoff しましたが正常動作している様子。
Image Name: boot script
Created: Wed May 11 08:24:21 2011
Image Type: ARM Linux Script (uncompressed)
Data Size: 330 Bytes = 0.32 kB = 0.00 MB
Load Address: 0x00000000
Entry Point: 0x00000000
Contents:
Image 0: 322 Bytes = 0 kB = 0 MB
Done creating Linaro Android image on /dev/sdb
$ sudo fdisk -l /dev/sdb
Disk /dev/sdb: 4023 MB, 4023386112 bytes
124 heads, 62 sectors/track, 1022 cylinders
Units = cylinders of 7688 * 512 = 3936256 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0006ac6d
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 36 135136 c W95 FAT32 (LBA)
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(0, 1, 32) logical=(0, 1, 2)
Partition 1 has different physical/logical endings:
phys=(65, 127, 31) logical=(35, 20, 15)
Partition 1 does not end on cylinder boundary.
/dev/sdb2 36 104 262144 83 Linux
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(66, 0, 1) logical=(35, 20, 17)
Partition 2 has different physical/logical endings:
phys=(193, 127, 32) logical=(103, 44, 32)
Partition 2 does not end on cylinder boundary.
/dev/sdb3 104 172 262144 83 Linux
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(194, 0, 1) logical=(103, 44, 33)
Partition 3 has different physical/logical endings:
phys=(321, 127, 32) logical=(171, 68, 48)
Partition 3 does not end on cylinder boundary.
/dev/sdb4 172 1023 3269632 5 Extended
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(322, 0, 1) logical=(171, 68, 49)
Partition 4 has different physical/logical endings:
phys=(1023, 127, 32) logical=(1022, 16, 48)
Partition 4 does not end on cylinder boundary.
/dev/sdb5 172 308 524272 83 Linux
/dev/sdb6 308 1023 2745328 83 Linux
$なんかやっぱ出力微妙なんだけど大丈夫かなぁ。ちなみに panda 君は持ち帰った @mito_log の中の人が取りに戻ります、とのこと。
基本的にはこの SD を panda に挿して電源入れれば良いだけのはず、かな。。
